Your cart
Your cart is empty
- 5-tonne point load
- R10 anti-slip, even oily
- Oil, fuel & coolant proof
- Clicks together, no glue
10mm range · built for vehicle traffic
Workshop Floor Tiles for Mechanics - Easy Clean Surface
Interlocking PVC tiles that lay straight over concrete, painted floors or old coatings. No adhesive, no cure time. Drive on it the same day.
Why 10mm, not 7mm or a coating
10mm adds impact absorption for jacks, hoists and dropped tools. Here is what you get over a thinner tile or a painted floor.
Trolley jacks, axle stands and equipment feet sit directly on the tile.
The rigid tile spans cracks and pitting up to 3 mm. No levelling compound, no prep beyond a sweep.
Epoxy needs 72+ hours to cure. These click down in an afternoon and you can drive in that evening.
Virgin closed-cell PVC, rated −20 °C to +60 °C. Polypropylene tiles go brittle in a cold garage.
Workshop Floor Tiles for Mechanics - Easy Clean Surface
These are 500 × 500mm interlocking PVC floor tiles in a choice of 7mm or 10mm thickness, made for mechanics' workshops that need a floor that is quick to clean. They lay straight over concrete, painted floors or old coatings with no adhesive and no cure time, and oil, fuel and brake fluid wipe straight off.
Technical Specifications
| Tile Dimensions | 500mm × 500mm (4 tiles per m²) |
| Thickness | 7mm or 10mm (choose above) |
| Load Rating | 5 tonnes point load (tested to BS EN ISO 24344) |
| Material | Virgin PVC, closed-cell construction |
| Surface Finish | Anti-slip textured (R10 rated to DIN 51130) |
| Fire Rating | Bfl-s1 (EN 13501-1) |
| Chemical Resistance | Oils, fuels, brake fluid, coolant, acids, solvents |
| Temperature Range | -20°C to +60°C |
| Weight per Tile | 1.8kg (7mm) · 2.5kg (10mm) |
| Connection System | Precision interlocking – no adhesive required |
Laying the tiles
Sweep the floor, start in a corner and press the joints together. There is no adhesive, primer or curing, so the floor can be used as soon as it is down. The rigid tiles bridge cracks and uneven areas up to 3mm. Cut edge tiles with a utility knife and leave a 5mm gap at the walls. Read the full fitting guide.
7mm or 10mm?
7mm suits home garages, cars, vans and light workshops. 10mm is thicker and absorbs more impact from jacks, hoists and dropped tools, so it is the better choice for forklifts, HGVs and heavy equipment. Matching ramp edges are made for the 10mm tiles.
Not sure which tile suits your floor? Contact us or order a free sample tile.
Not sure which tile? 30-second check
7mm Heavy-Duty
- Best for
- Home garage, DIY, light workshop
- Vehicles
- Cars, vans, motorcycles
- Finish
- Smooth or raised disc
- Colours
- 8
10mm Ultra
- Best for
- Workshops, HGV depots, fire stations
- Vehicles
- Forklifts, vans, HGVs
- Finish
- Textured R10
- Colours
- 4
X-Joint
- Best for
- Showrooms, home bars, gyms
- Load
- 5-tonne point load
- Finish
- Hidden joint
- Colours
- 8
Still torn? Send us a photo of the floor on WhatsApp and we will tell you which one, and how many.
Laid in an afternoon
Single garage (15 m²): 1.5–2 h, one person · Double (30 m²): 2–3 h, two peopleLength × width in metres. Four tiles cover one square metre.
Brush the concrete. No primer, no levelling, no drying time.
Start in a corner and press the joints together. A rubber mallet helps.
Cut the last row with a utility knife, leave a 5mm gap at the walls and add ramps at the door.
Finish the job
Questions buyers ask before ordering
Will it take a trolley jack or axle stands?
Yes. Each tile is rated to a 5-tonne point load (BS EN ISO 24344), so jacks and axle stands sit straight on the tile.
My concrete is cracked and dusty. Do I need to prep it?
No. Sweep it and lay the tiles straight over bare or painted concrete. The rigid tiles bridge imperfections up to 3mm. No grinding, priming or moisture testing.
Will oil or brake fluid stain it?
No. Closed-cell PVC does not absorb fluids, so oil, brake fluid, coolant and fuel stay on the surface and wipe off.
Does it get slippery when wet?
No. The surface is R10 rated to DIN 51130, so it keeps its grip with water or oil on it.
What if I damage one tile?
Lift the surrounding edges, take the damaged tile out and click a new one in. No contractor and no curing.
Can I take it with me when I move?
Yes. There is no adhesive, so the tiles lift up and relay in your next garage.
Covering 50 m² or more?
Workshops, dealerships and MOT bays get a written trade price and a fitting plan. We reply within one working day.
- Choosing a selection results in a full page refresh.
- Opens in a new window.