7mm ESD Anti-Static Interlocking PVC Floor Tiles
Anti-slip textured surface.
Your cart
Your cart is empty
1 range · 5mm and 7mm
Interlocking PVC tiles that lay straight over concrete, painted floors or old coatings. No adhesive, no cure time. Drive on it the same day.
Every range below now shows the total for this floor.
Anti-slip textured surface.
Not sure yet?
Free samples so you can check the surface, thickness and colour in your own garage.
Request free samplesNo range matches those filters.
Pick one thickness for the whole floor. Mixing 7mm and 10mm leaves a step that is a trip hazard.
Ramps and corners clip onto the open edge so cars roll on smoothly and nobody trips on the step.
Yes. 7mm suits most home garages with car storage, DIY and standard tools. Move up to 10mm only for heavy machinery or commercial and industrial loads.
Yes. Sweep the floor and lay the tiles straight over bare or painted concrete or existing tiles. The rigid tiles bridge imperfections up to 3mm. No grinding, priming or moisture testing.
A single garage takes about 1.5–2 hours and a double 2–3 hours. Tiles click together by hand and edge tiles cut with a utility knife.
Lift the surrounding edges, take the damaged tile out and click a new one in. No contractor and no curing.
No. The surface is R10 rated to DIN 51130, so it keeps its grip with water or oil on it. Spills stay on top and wipe off.
Static dissipative interlocking PVC floor tiles (BS EN 61340-5-1) for server rooms, electronics assembly, repair benches and control rooms. Surface resistance is 10⁶ to 10⁹ ohms, and the tiles can be connected to the building earth with grounding strips for full ESD performance.
Tiles are 500 × 500mm, 7mm thick and lay over the existing floor with no adhesive. Questions about your installation? Contact us.