Professional Edge Finishing for Interlocking Floor Systems
Complete your interlocking floor installation with professional-grade ramp and corner pieces. These 10mm PVC edge trims create smooth transitions between your floor tiles and existing surfaces, eliminating trip hazards and providing a clean, finished appearance suitable for commercial and industrial environments.
You are buying ramp edge pieces, not floor tiles. Choose a straight ramp section or a corner piece, then pick the colour.
Ramp Section or Corner Piece
-
Straight ramp section – a sloped edge that clicks onto the open edge of your floor, most often along the garage door line, so wheels roll on and off without a step.
-
Corner piece – closes the end where two ramp runs meet at a corner of the floor, so there is no open tile edge left.
Colours
Yellow, Dark Grey or Black. Yellow marks the floor edge clearly as a safety line; Dark Grey and Black blend in with the floor.
Which Tiles They Fit
These ramps are 10mm thick and are made for our 10mm interlocking PVC floor tiles. They are not made for 7mm tiles.
Why Fit Ramp Edges
- Stops the outer tiles lifting when a vehicle drives over the edge
- Smooth transition that protects tyre sidewalls
- Removes the trip hazard at the edge of the floor
- Gives the floor a neat, finished look
How Many Do I Need?
Measure each open edge of the floor, usually the door line, and order enough straight ramp sections to cover that length. Add one corner piece wherever a ramp run turns a corner. Not sure? Send us your floor size and we will work out the ramps for you.
Fitting
Lay the tiles first, then press the ramp sections onto the open tile edge the same way the tiles click together. No adhesive and no tools needed. See the full fitting guide.
Material
Made from the same PVC as our floor tiles, so oil, fuel, brake fluid and coolant wipe straight off.
