Your cart
Your cart is empty
Heavy-Duty Floor Tiles - Hard-Wearing Epoxy Alternative
Heavy-Duty Floor Tiles - Hard-Wearing Epoxy Alternative
These are 500 × 500mm interlocking PVC floor tiles in a choice of 7mm or 10mm thickness, made for floors that need a hard-wearing finish without the cure time of epoxy. They lay straight over concrete, painted floors or old coatings with no adhesive and no cure time, and oil, fuel and brake fluid wipe straight off.
Technical Specifications
| Tile Dimensions | 500mm × 500mm (4 tiles per m²) |
| Thickness | 7mm or 10mm (choose above) |
| Load Rating | 5 tonnes point load (tested to BS EN ISO 24344) |
| Material | Virgin PVC, closed-cell construction |
| Surface Finish | Anti-slip textured (R10 rated to DIN 51130) |
| Fire Rating | Bfl-s1 (EN 13501-1) |
| Chemical Resistance | Oils, fuels, brake fluid, coolant, acids, solvents |
| Temperature Range | -20°C to +60°C |
| Weight per Tile | 1.8kg (7mm) · 2.5kg (10mm) |
| Connection System | Precision interlocking – no adhesive required |
Laying the tiles
Sweep the floor, start in a corner and press the joints together. There is no adhesive, primer or curing, so the floor can be used as soon as it is down. The rigid tiles bridge cracks and uneven areas up to 3mm. Cut edge tiles with a utility knife and leave a 5mm gap at the walls. Read the full fitting guide.
7mm or 10mm?
7mm suits home garages, cars, vans and light workshops. 10mm is thicker and absorbs more impact from jacks, hoists and dropped tools, so it is the better choice for forklifts, HGVs and heavy equipment. Matching ramp edges are made for the 10mm tiles.
Not sure which tile suits your floor? Contact us or order a free sample tile.
Covering 50 m² or more?
Workshops, dealerships and MOT bays get a written trade price and a fitting plan. We reply within one working day.
- Choosing a selection results in a full page refresh.
- Opens in a new window.