7 ranges · 7mm and 10mm

Oil & Grease Proof

Interlocking PVC tiles that lay straight over concrete, painted floors or old coatings. No adhesive, no cure time. Drive on it the same day.

Price your floor

Prices inc. VAT
50 tiles10 × 5 · 12.5 m²

Every range below now shows the total for this floor.

Thickness
Joint
7 of 7 ranges

7mm Heavy-Duty Interlocking Tiles

Smooth or raised disc surface. Cars, vans, jacks and axle stands.

8 colours

Heavy-duty load rating (BS EN ISO 24344)

From £17.90per tile · £71.60/m²
Your 5 × 2.5m floor · 50 tiles
Choose colour

7mm T-Joint E500 Tiles

Brick-pattern joint. Textured or raised disc surface.

8 colours

5-tonne point load

From £17.99per tile · £71.96/m²
Your 5 × 2.5m floor · 50 tiles
Choose colour

Not sure yet?

Feel the tiles before you order

Free samples so you can check the surface, thickness and colour in your own garage.

Request free samples

7mm or 10mm?

Pick one thickness for the whole floor. Mixing 7mm and 10mm leaves a step that is a trip hazard.

Choose 7mm when

  • It is a home garage: car storage, DIY and a light workshop
  • Traffic is mostly foot traffic and your own vehicles
  • You use standard garage tools, trolley jacks and axle stands
  • Garage door clearance is tight: 7mm plus a ramp edge is typically 10–15mm

Choose 10mm when

  • Heavy equipment or machinery stands on the floor
  • Forklifts, pallet trucks or HGVs drive over it
  • You want the most impact absorption under dropped tools
  • It is a commercial workshop or industrial unit

Compare the ranges

Every tile here is 500 × 500mm (4 tiles per m²). This is what is different. Tap Compare on any card to highlight it here.

Spec7mm Heavy-Duty Interlocking Tiles10mm Oil & Chemical Resistant TilesAircraft Hangar Floor Tiles 10mm PVCHGV Garage Floor Tiles 10mm Ultra Heavy10mm Heavy-Duty Garage Tiles7mm X-Joint Tiles7mm T-Joint E500 Tiles
Joint lookStandard interlockStandard interlockStandard interlockStandard interlockStandard interlockHidden X-jointBrick-pattern T-joint
SurfaceSmooth or raised discAnti-slip texturedAnti-slip texturedAnti-slip texturedAnti-slip texturedAnti-slip texturedTextured or raised disc
Colours8 colours4 colours4 colours4 colours4 colours8 colours8 colours
Load ratingHeavy-duty load rating (BS EN ISO 24344)5-tonne point load5-tonne point load5-tonne point load5-tonne point load5-tonne point load5-tonne point load
Weight per tile—2.5kg2.5kg2.5kg2.5kg1.8kg1.8kg
Price per tileFrom £17.90£21.50£21.50£21.50£21.50From £15.90From £17.99
Your 5 × 2.5m floor———————

Finish the door edge

Ramps and corners clip onto the open edge so cars roll on smoothly and nobody trips on the step.

Shop ramps & edging

Questions before you buy

Is 7mm thick enough for a garage?

Yes. 7mm suits most home garages with car storage, DIY and standard tools. Move up to 10mm only for heavy machinery or commercial and industrial loads.

Can I lay them over painted or cracked concrete?

Yes. Sweep the floor and lay the tiles straight over bare or painted concrete or existing tiles. The rigid tiles bridge imperfections up to 3mm. No grinding, priming or moisture testing.

How long does it take to lay a garage?

A single garage takes about 1.5–2 hours and a double 2–3 hours. Tiles click together by hand and edge tiles cut with a utility knife.

What if a tile gets damaged?

Lift the surrounding edges, take the damaged tile out and click a new one in. No contractor and no curing.

Are the tiles slippery when wet or oily?

No. The surface is R10 rated to DIN 51130, so it keeps its grip with water or oil on it. Spills stay on top and wipe off.

About oil & grease proof

Closed-cell PVC floor tiles that do not absorb engine oil, gearbox oil, brake fluid, coolant or fuel. Spills sit on the surface and wipe away, so the floor does not stain like bare concrete. For home garages, DIY workshops and service bays.

Order a free sample tile