Heavy-Duty Concrete Overlay Tiles - 7mm or 10mm Interlocking PVC
Anti-slip textured surface.
5-tonne point load
Your cart
Your cart is empty
3 ranges · 7mm and 10mm
Interlocking PVC tiles that lay straight over concrete, painted floors or old coatings. No adhesive, no cure time. Drive on it the same day.
Every range below now shows the total for this floor.
Anti-slip textured surface.
5-tonne point load
Anti-slip textured surface.
5-tonne point load
Anti-slip textured surface.
5-tonne point load
Not sure yet?
Free samples so you can check the surface, thickness and colour in your own garage.
Request free samplesNo range matches those filters.
Pick one thickness for the whole floor. Mixing 7mm and 10mm leaves a step that is a trip hazard.
Every tile here is 500 × 500mm (4 tiles per m²). This is what is different. Tap Compare on any card to highlight it here.
| Spec | Heavy-Duty Concrete Overlay Tiles - 7mm or 10mm Interlocking PVC | Industrial Concrete Cover Tiles - Damaged Floor Solution | Concrete Floor Covering Tiles - Direct Overlay System |
|---|---|---|---|
| Joint look | Standard interlock | Standard interlock | Standard interlock |
| Surface | Anti-slip textured | Anti-slip textured | Anti-slip textured |
| Colours | 3 colours | 3 colours | 3 colours |
| Load rating | 5-tonne point load | 5-tonne point load | 5-tonne point load |
| Weight per tile | 1.8kg | 1.8kg | 1.8kg |
| Price per tile | From £15.90 | From £15.90 | From £15.90 |
| Your 5 × 2.5m floor | — | — | — |
Ramps and corners clip onto the open edge so cars roll on smoothly and nobody trips on the step.
Yes. 7mm suits most home garages with car storage, DIY and standard tools. Move up to 10mm only for heavy machinery or commercial and industrial loads.
Yes. Sweep the floor and lay the tiles straight over bare or painted concrete or existing tiles. The rigid tiles bridge imperfections up to 3mm. No grinding, priming or moisture testing.
A single garage takes about 1.5–2 hours and a double 2–3 hours. Tiles click together by hand and edge tiles cut with a utility knife.
Lift the surrounding edges, take the damaged tile out and click a new one in. No contractor and no curing.
No. The surface is R10 rated to DIN 51130, so it keeps its grip with water or oil on it. Spills stay on top and wipe off.
Cover worn, dusty or stained concrete without grinding or replacing it. These interlocking PVC tiles lay straight over the existing slab with no adhesive, bridge cracks and uneven areas up to 3mm, and can be used as soon as they are down. They lift out again if you move, leaving the concrete as it was.