Your cart
Your cart is empty
- R10 anti-slip, even oily
- Clicks together, no glue
5mm range · interlocking PVC
7mm ESD Anti-Static Interlocking PVC Floor Tiles | BS EN 61340 Compliant | Server Rooms & Electronics | UK Stock
Interlocking PVC tiles that lay straight over concrete, painted floors or old coatings. No adhesive, no cure time. Drive on it the same day.
Why tiles, not a coating
Here is what an interlocking floor gives you over paint or epoxy.
Epoxy needs 72+ hours to cure. These click down in an afternoon and you can drive in that evening.
7mm ESD Anti-Static Interlocking PVC Floor Tiles
These are 500 × 500mm static dissipative interlocking PVC floor tiles in 7mm thickness, made for server rooms, electronics assembly, repair benches and control rooms where static discharge can damage equipment. They lay over the existing floor with no adhesive.
Technical Specifications
| Tile Dimensions | 500mm × 500mm (4 tiles per m²) |
| Thickness | 7mm |
| ESD Classification | Static dissipative (BS EN 61340-5-1) |
| Surface Resistance | 10⁶ to 10⁹ ohms |
| System Resistance | < 10⁹ ohms when grounded |
| Material | Conductive PVC compound |
| Surface Finish | Anti-slip textured (R10 rated) |
| Fire Rating | Bfl-s1 (EN 13501-1) |
| Connection | Interlocking, with grounding capability |
Static dissipative, conductive or antistatic?
| Conductive | < 10⁶ ohms | Explosive atmospheres |
| Static dissipative | 10⁶ – 10⁹ ohms | Electronics, server rooms |
| Antistatic | 10⁹ – 10¹² ohms | General static reduction |
These tiles are static dissipative, the class normally specified for protecting electronics.
Grounding and fitting
For full ESD performance, lay copper grounding strips under the tiles at intervals and connect them to the building earth point, then check the system resistance. An electrician can make the earth connection. Without grounding the tiles still reduce static build-up through their surface resistance. Lay the tiles by pressing the joints together and cut edge tiles with a utility knife.
Cleaning
Use an ESD-safe floor cleaner and avoid wax or polish, which can insulate the surface. Keep the floor free of dust, and test resistance periodically in critical areas.
Questions about your installation? Contact us or order a free sample tile.
Not sure which tile? 30-second check
7mm Heavy-Duty
- Best for
- Home garage, DIY, light workshop
- Vehicles
- Cars, vans, motorcycles
- Finish
- Smooth or raised disc
- Colours
- 8
10mm Ultra
- Best for
- Workshops, HGV depots, fire stations
- Vehicles
- Forklifts, vans, HGVs
- Finish
- Textured R10
- Colours
- 4
X-Joint
- Best for
- Showrooms, home bars, gyms
- Load
- 5-tonne point load
- Finish
- Hidden joint
- Colours
- 8
Still torn? Send us a photo of the floor on WhatsApp and we will tell you which one, and how many.
Laid in an afternoon
Single garage (15 m²): 1.5–2 h, one person · Double (30 m²): 2–3 h, two peopleLength × width in metres. Four tiles cover one square metre.
Brush the concrete. No primer, no levelling, no drying time.
Start in a corner and press the joints together. A rubber mallet helps.
Cut the last row with a utility knife, leave a 5mm gap at the walls and add ramps at the door.
Questions buyers ask before ordering
Will it take a trolley jack or axle stands?
Yes. Standard trolley jacks and axle stands work fine on these tiles.
My concrete is cracked and dusty. Do I need to prep it?
No. Sweep it and lay the tiles straight over bare or painted concrete. The rigid tiles bridge imperfections up to 3mm. No grinding, priming or moisture testing.
Will oil or brake fluid stain it?
No. Closed-cell PVC does not absorb fluids, so oil, brake fluid, coolant and fuel stay on the surface and wipe off.
Does it get slippery when wet?
No. The surface is R10 rated to DIN 51130, so it keeps its grip with water or oil on it.
What if I damage one tile?
Lift the surrounding edges, take the damaged tile out and click a new one in. No contractor and no curing.
Can I take it with me when I move?
Yes. There is no adhesive, so the tiles lift up and relay in your next garage.
Covering 50 m² or more?
Workshops, dealerships and MOT bays get a written trade price and a fitting plan. We reply within one working day.
- Choosing a selection results in a full page refresh.
- Opens in a new window.